1
2 #include <php_compat.h>
3
4 #ifndef PHP_WIN32
5 # include <php_config.h>
6 #endif
7
8 #undef PACKAGE_NAME
9 #undef PACKAGE_VERSION
10 #undef PACKAGE_TARNAME
11 #undef PACKAGE_STRING
12
13 #define SUPPORT_UCP
14 #define SUPPORT_UTF8
15
16 #if defined(__GNUC__) && __GNUC__ >= 4
17 # ifdef __cplusplus
18 # define PCRE_EXP_DECL extern "C" __attribute__ ((visibility("default")))
19 # else
20 # define PCRE_EXP_DECL extern __attribute__ ((visibility("default")))
21 # endif
22 # define PCRE_EXP_DEFN __attribute__ ((visibility("default")))
23 # define PCRE_EXP_DATA_DEFN __attribute__ ((visibility("default")))
24 #endif
25
26
27 /* Exclude these below definitions when building within PHP */
28 #ifndef ZEND_API
29
30 /* config.h. Generated from config.h.in by configure. */
31 /* config.h.in. Generated from configure.ac by autoheader. */
32
33
34 /* PCRE is written in Standard C, but there are a few non-standard things it
35 can cope with, allowing it to run on SunOS4 and other "close to standard"
36 systems.
37
38 In environments that support the facilities, config.h.in is converted by
39 "configure", or config-cmake.h.in is converted by CMake, into config.h. If you
40 are going to build PCRE "by hand" without using "configure" or CMake, you
41 should copy the distributed config.h.generic to config.h, and then edit the
42 macro definitions to be the way you need them. You must then add
43 -DHAVE_CONFIG_H to all of your compile commands, so that config.h is included
44 at the start of every source.
45
46 Alternatively, you can avoid editing by using -D on the compiler command line
47 to set the macro values. In this case, you do not have to set -DHAVE_CONFIG_H.
48
49 PCRE uses memmove() if HAVE_MEMMOVE is set to 1; otherwise it uses bcopy() if
50 HAVE_BCOPY is set to 1. If your system has neither bcopy() nor memmove(), set
51 them both to 0; an emulation function will be used. */
52
53 /* By default, the \R escape sequence matches any Unicode line ending
54 character or sequence of characters. If BSR_ANYCRLF is defined (to any
55 value), this is changed so that backslash-R matches only CR, LF, or CRLF.
56 The build-time default can be overridden by the user of PCRE at runtime. */
57 #undef BSR_ANYCRLF
58
59 /* If you are compiling for a system that uses EBCDIC instead of ASCII
60 character codes, define this macro to any value. You must also edit the
61 NEWLINE macro below to set a suitable EBCDIC newline, commonly 21 (0x15).
62 On systems that can use "configure" or CMake to set EBCDIC, NEWLINE is
63 automatically adjusted. When EBCDIC is set, PCRE assumes that all input
64 strings are in EBCDIC. If you do not define this macro, PCRE will assume
65 input strings are ASCII or UTF-8/16/32 Unicode. It is not possible to build
66 a version of PCRE that supports both EBCDIC and UTF-8/16/32. */
67 #undef EBCDIC
68
69 /* In an EBCDIC environment, define this macro to any value to arrange for the
70 NL character to be 0x25 instead of the default 0x15. NL plays the role that
71 LF does in an ASCII/Unicode environment. The value must also be set in the
72 NEWLINE macro below. On systems that can use "configure" or CMake to set
73 EBCDIC_NL25, the adjustment of NEWLINE is automatic. */
74 #undef EBCDIC_NL25
75
76 /* Define to 1 if you have the `bcopy' function. */
77 #ifndef HAVE_BCOPY
78 #define HAVE_BCOPY 1
79 #endif
80
81 /* Define to 1 if you have the <bits/type_traits.h> header file. */
82 /* #undef HAVE_BITS_TYPE_TRAITS_H */
83
84 /* Define to 1 if you have the <bzlib.h> header file. */
85 #ifndef HAVE_BZLIB_H
86 #define HAVE_BZLIB_H 1
87 #endif
88
89 /* Define to 1 if you have the <dirent.h> header file. */
90 #ifndef HAVE_DIRENT_H
91 #define HAVE_DIRENT_H 1
92 #endif
93
94 /* Define to 1 if you have the <dlfcn.h> header file. */
95 #ifndef HAVE_DLFCN_H
96 #define HAVE_DLFCN_H 1
97 #endif
98
99 /* Define to 1 if you have the <editline/readline.h> header file. */
100 /*#undef HAVE_EDITLINE_READLINE_H*/
101
102 /* Define to 1 if you have the <edit/readline/readline.h> header file. */
103 /* #undef HAVE_EDIT_READLINE_READLINE_H */
104
105 /* Define to 1 if you have the <inttypes.h> header file. */
106 #ifndef HAVE_INTTYPES_H
107 #define HAVE_INTTYPES_H 1
108 #endif
109
110 /* Define to 1 if you have the <limits.h> header file. */
111 #ifndef HAVE_LIMITS_H
112 #define HAVE_LIMITS_H 1
113 #endif
114
115 /* Define to 1 if the system has the type `long long'. */
116 #ifndef HAVE_LONG_LONG
117 #define HAVE_LONG_LONG 1
118 #endif
119
120 /* Define to 1 if you have the `memmove' function. */
121 #ifndef HAVE_MEMMOVE
122 #define HAVE_MEMMOVE 1
123 #endif
124
125 /* Define to 1 if you have the <memory.h> header file. */
126 #ifndef HAVE_MEMORY_H
127 #define HAVE_MEMORY_H 1
128 #endif
129
130 /* Define if you have POSIX threads libraries and header files. */
131 #undef HAVE_PTHREAD
132
133 /* Have PTHREAD_PRIO_INHERIT. */
134 #undef HAVE_PTHREAD_PRIO_INHERIT
135 /* Define to 1 if you have the <readline/history.h> header file. */
136 #ifndef HAVE_READLINE_HISTORY_H
137 #define HAVE_READLINE_HISTORY_H 1
138 #endif
139
140 /* Define to 1 if you have the <readline/readline.h> header file. */
141 #ifndef HAVE_READLINE_READLINE_H
142 #define HAVE_READLINE_READLINE_H 1
143 #endif
144
145 /* Define to 1 if you have the <stdint.h> header file. */
146 #ifndef HAVE_STDINT_H
147 #define HAVE_STDINT_H 1
148 #endif
149
150 /* Define to 1 if you have the <stdlib.h> header file. */
151 #ifndef HAVE_STDLIB_H
152 #define HAVE_STDLIB_H 1
153 #endif
154
155 /* Define to 1 if you have the `strerror' function. */
156 #ifndef HAVE_STRERROR
157 #define HAVE_STRERROR 1
158 #endif
159
160 /* Define to 1 if you have the <string> header file. */
161 #ifndef HAVE_STRING
162 #define HAVE_STRING 1
163 #endif
164
165 /* Define to 1 if you have the <strings.h> header file. */
166 #ifndef HAVE_STRINGS_H
167 #define HAVE_STRINGS_H 1
168 #endif
169
170 /* Define to 1 if you have the <string.h> header file. */
171 #ifndef HAVE_STRING_H
172 #define HAVE_STRING_H 1
173 #endif
174
175 /* Define to 1 if you have `strtoimax'. */
176 /* #undef HAVE_STRTOIMAX */
177
178 /* Define to 1 if you have `strtoll'. */
179 /* #undef HAVE_STRTOLL */
180
181 /* Define to 1 if you have `strtoq'. */
182 #ifndef HAVE_STRTOQ
183 #define HAVE_STRTOQ 1
184 #endif
185
186 /* Define to 1 if you have the <sys/stat.h> header file. */
187 #ifndef HAVE_SYS_STAT_H
188 #define HAVE_SYS_STAT_H 1
189 #endif
190
191 /* Define to 1 if you have the <sys/types.h> header file. */
192 #ifndef HAVE_SYS_TYPES_H
193 #define HAVE_SYS_TYPES_H 1
194 #endif
195
196 /* Define to 1 if you have the <type_traits.h> header file. */
197 /* #undef HAVE_TYPE_TRAITS_H */
198
199 /* Define to 1 if you have the <unistd.h> header file. */
200 #ifndef HAVE_UNISTD_H
201 #define HAVE_UNISTD_H 1
202 #endif
203
204 /* Define to 1 if the system has the type `unsigned long long'. */
205 #ifndef HAVE_UNSIGNED_LONG_LONG
206 #define HAVE_UNSIGNED_LONG_LONG 1
207 #endif
208
209 /* Define to 1 or 0, depending whether the compiler supports simple visibility
210 declarations. */
211 /* #undef HAVE_VISIBILITY */
212
213 /* Define to 1 if you have the <windows.h> header file. */
214 /* #undef HAVE_WINDOWS_H */
215
216 /* Define to 1 if you have the <zlib.h> header file. */
217 #ifndef HAVE_ZLIB_H
218 #define HAVE_ZLIB_H 1
219 #endif
220
221 /* Define to 1 if you have `_strtoi64'. */
222 /* #undef HAVE__STRTOI64 */
223
224 /* Exclude these above definitions when building within PHP */
225 #endif
226
227 /* The value of LINK_SIZE determines the number of bytes used to store links
228 as offsets within the compiled regex. The default is 2, which allows for
229 compiled patterns up to 64K long. This covers the vast majority of cases.
230 However, PCRE can also be compiled to use 3 or 4 bytes instead. This allows
231 for longer patterns in extreme cases. On systems that support it,
232 "configure" can be used to override this default. */
233 #ifndef LINK_SIZE
234 #define LINK_SIZE 2
235 #endif
236
237 /* Define to the sub-directory where libtool stores uninstalled libraries. */
238 /* This is ignored unless you are using libtool. */
239 #ifndef LT_OBJDIR
240 #define LT_OBJDIR ".libs/"
241 #endif
242
243 /* The value of MATCH_LIMIT determines the default number of times the
244 internal match() function can be called during a single execution of
245 pcre_exec(). There is a runtime interface for setting a different limit.
246 The limit exists in order to catch runaway regular expressions that take
247 for ever to determine that they do not match. The default is set very large
248 so that it does not accidentally catch legitimate cases. On systems that
249 support it, "configure" can be used to override this default default. */
250 #ifndef MATCH_LIMIT
251 #define MATCH_LIMIT 10000000
252 #endif
253
254 /* The above limit applies to all calls of match(), whether or not they
255 increase the recursion depth. In some environments it is desirable to limit
256 the depth of recursive calls of match() more strictly, in order to restrict
257 the maximum amount of stack (or heap, if NO_RECURSE is defined) that is
258 used. The value of MATCH_LIMIT_RECURSION applies only to recursive calls of
259 match(). To have any useful effect, it must be less than the value of
260 MATCH_LIMIT. The default is to use the same value as MATCH_LIMIT. There is
261 a runtime method for setting a different limit. On systems that support it,
262 "configure" can be used to override the default. */
263 #ifndef MATCH_LIMIT_RECURSION
264 #define MATCH_LIMIT_RECURSION MATCH_LIMIT
265 #endif
266
267 /* This limit is parameterized just in case anybody ever wants to change it.
268 Care must be taken if it is increased, because it guards against integer
269 overflow caused by enormously large patterns. */
270 #ifndef MAX_NAME_COUNT
271 #define MAX_NAME_COUNT 10000
272 #endif
273
274 /* This limit is parameterized just in case anybody ever wants to change it.
275 Care must be taken if it is increased, because it guards against integer
276 overflow caused by enormously large patterns. */
277 #ifndef MAX_NAME_SIZE
278 #define MAX_NAME_SIZE 32
279 #endif
280
281 /* The value of NEWLINE determines the default newline character sequence.
282 PCRE client programs can override this by selecting other values at run
283 time. In ASCII environments, the value can be 10 (LF), 13 (CR), or 3338
284 (CRLF); in EBCDIC environments the value can be 21 or 37 (LF), 13 (CR), or
285 3349 or 3365 (CRLF) because there are two alternative codepoints (0x15 and
286 0x25) that are used as the NL line terminator that is equivalent to ASCII
287 LF. In both ASCII and EBCDIC environments the value can also be -1 (ANY),
288 or -2 (ANYCRLF). */
289 #ifndef NEWLINE
290 #define NEWLINE 10
291 #endif
292
293 /* Define to 1 if your C compiler doesn't accept -c and -o together. */
294 /* #undef NO_MINUS_C_MINUS_O */
295
296 /* PCRE uses recursive function calls to handle backtracking while matching.
297 This can sometimes be a problem on systems that have stacks of limited
298 size. Define NO_RECURSE to any value to get a version that doesn't use
299 recursion in the match() function; instead it creates its own stack by
300 steam using pcre_recurse_malloc() to obtain memory from the heap. For more
301 detail, see the comments and other stuff just above the match() function.
302 */
303 /* #undef NO_RECURSE */
304
305 #define PARENS_NEST_LIMIT 250
306
307 /* Name of package */
308 #define PACKAGE "pcre"
309
310 /* Define to the address where bug reports for this package should be sent. */
311 #define PACKAGE_BUGREPORT ""
312
313 /* Define to the full name of this package. */
314 #define PACKAGE_NAME "PCRE"
315
316 /* Define to the full name and version of this package. */
317 #define PACKAGE_STRING "PCRE 8.38"
318
319 /* Define to the one symbol short name of this package. */
320 #define PACKAGE_TARNAME "pcre"
321
322 /* Define to the home page for this package. */
323 #define PACKAGE_URL ""
324
325 /* Define to the version of this package. */
326 #define PACKAGE_VERSION "8.38"
327
328 /* to make a symbol visible */
329 /* #undef PCRECPP_EXP_DECL */
330
331 /* to make a symbol visible */
332 /* #undef PCRECPP_EXP_DEFN */
333
334 /* The value of PARENS_NEST_LIMIT specifies the maximum depth of nested
335 parentheses (of any kind) in a pattern. This limits the amount of system
336 stack that is used while compiling a pattern. */
337 #ifndef PARENS_NEST_LIMIT
338 #define PARENS_NEST_LIMIT 250
339 #endif
340
341 /* The value of PCREGREP_BUFSIZE determines the size of buffer used by
342 pcregrep to hold parts of the file it is searching. This is also the
343 minimum value. The actual amount of memory used by pcregrep is three times
344 this number, because it allows for the buffering of "before" and "after"
345 lines. */
346 /* #undef PCREGREP_BUFSIZE */
347
348 /* to make a symbol visible */
349 /* #undef PCREPOSIX_EXP_DECL */
350
351 /* to make a symbol visible */
352 /* #undef PCREPOSIX_EXP_DEFN */
353
354 /* to make a symbol visible */
355 /* #undef PCRE_EXP_DATA_DEFN */
356
357 /* to make a symbol visible */
358 /* #undef PCRE_EXP_DECL */
359
360
361 /* If you are compiling for a system other than a Unix-like system or
362 Win32, and it needs some magic to be inserted before the definition
363 of a function that is exported by the library, define this macro to
364 contain the relevant magic. If you do not define this macro, a suitable
365 __declspec value is used for Windows systems; in other environments
366 "extern" is used for a C compiler and "extern C" for a C++ compiler.
367 This macro apears at the start of every exported function that is part
368 of the external API. It does not appear on functions that are "external"
369 in the C sense, but which are internal to the library. */
370 /* #undef PCRE_EXP_DEFN */
371
372 /* Define to any value if linking statically (TODO: make nice with Libtool) */
373 /* #undef PCRE_STATIC */
374
375 /* When calling PCRE via the POSIX interface, additional working storage is
376 required for holding the pointers to capturing substrings because PCRE
377 requires three integers per substring, whereas the POSIX interface provides
378 only two. If the number of expected substrings is small, the wrapper
379 function uses space on the stack, because this is faster than using
380 malloc() for each call. The threshold above which the stack is no longer
381 used is defined by POSIX_MALLOC_THRESHOLD. */
382 #ifndef POSIX_MALLOC_THRESHOLD
383 #define POSIX_MALLOC_THRESHOLD 10
384 #endif
385
386 /* Define to necessary symbol if this constant uses a non-standard name on
387 your system. */
388 /* #undef PTHREAD_CREATE_JOINABLE */
389
390 /* Define to 1 if you have the ANSI C header files. */
391 #ifndef STDC_HEADERS
392 #define STDC_HEADERS 1
393 #endif
394
395 /* Define to allow pcretest and pcregrep to be linked with gcov, so that they
396 are able to generate code coverage reports. */
397 #undef SUPPORT_GCOV
398
399 /* Define to any value to enable support for Just-In-Time compiling. */
400 #define SUPPORT_JIT
401
402 /* Define to any value to allow pcregrep to be linked with libbz2, so that it
403 is able to handle .bz2 files. */
404 /* #undef SUPPORT_LIBBZ2 */
405
406 /* Define to any value to allow pcretest to be linked with libedit. */
407 #undef SUPPORT_LIBEDIT
408
409 /* Define to any value to allow pcretest to be linked with libreadline. */
410 /* #undef SUPPORT_LIBREADLINE */
411
412 /* Define to any value to allow pcregrep to be linked with libz, so that it is
413 able to handle .gz files. */
414 /* #undef SUPPORT_LIBZ */
415
416 /* Define to any value to enable the 16 bit PCRE library. */
417 /* #undef SUPPORT_PCRE16 */
418
419 /* Define to any value to enable the 32 bit PCRE library. */
420 /* #undef SUPPORT_PCRE32 */
421
422 /* Define to any value to enable the 8 bit PCRE library. */
423 /* #undef SUPPORT_PCRE8 */
424
425 /* Define to any value to enable JIT support in pcregrep. */
426 /* #undef SUPPORT_PCREGREP_JIT */
427
428 /* Define to enable support for Unicode properties */
429 /* #undef SUPPORT_UCP */
430
431 /* Define to any value to enable support for the UTF-8/16/32 Unicode encoding.
432 This will work even in an EBCDIC environment, but it is incompatible with
433 the EBCDIC macro. That is, PCRE can support *either* EBCDIC code *or*
434 ASCII/UTF-8/16/32, but not both at once. */
435 /* #undef SUPPORT_UTF8 */
436
437 /* Valgrind support to find invalid memory reads. */
438 /* #undef SUPPORT_VALGRIND */
439
440 /* Version number of package */
441 #ifndef VERSION
442 #define VERSION "8.38"
443 #endif
444
445 /* Define to empty if `const' does not conform to ANSI C. */
446 /* #undef const */
447
448 /* Define to the type of a signed integer type of width exactly 64 bits if
449 such a type exists and the standard includes do not define it. */
450 /* #undef int64_t */
451
452 /* Define to `unsigned int' if <sys/types.h> does not define. */
453 /* #undef size_t */